Free spreadtrum cpu China Mobile flash

1. Download the necessary tools and firmware: You'll need to download the firmware for your specific China Mobile device model, as well as the appropriate flashing tool. You can find these resources by searching online for your phone's model number and "firmware" or "flashing tool."

2. Install the Spreadtrum USB drivers: Before you can connect your phone to your computer and start the flashing process, you'll need to install the Spreadtrum USB drivers on your computer. You can usually find these drivers alongside the flashing tools you downloaded in step one.

3. Extract the firmware files: Once you've downloaded the firmware, extract the files from the compressed folder to a new folder on your computer.

4. Open the flashing tool: Depending on the tool you downloaded, you may need to extract the tool from a compressed folder as well. Once you have the tool ready, open it on your computer.

5. Connect your phone to your computer: Use a USB cable to connect your China Mobile device to your computer.

6. Load the firmware: In the flashing tool, you should see an option to load the firmware files you extracted earlier. Select the appropriate files for your phone model and follow the tool's instructions to begin the flashing process.

7. Wait for the process to complete: Depending on your phone model and the size of the firmware, the flashing process could take anywhere from a few minutes to over an hour. Do not disconnect your phone from your computer or interrupt the flashing process until it has completed.

Once the flashing process is complete, you should see a message indicating that the firmware has been successfully installed. Your China Mobile device should now be updated with the new firmware. Note that flashing your phone can potentially brick it, so proceed with caution and make sure you have a backup of your important data before starting the process.